Page 2
Use your laptop or mobile device to visit www.netgear.com/ptv and download new firmware. Press and hold the Push2TV side button for 7 seconds. On your laptop or mobile device, find and connect to the Push2TV WiFi network name (SSID). Open a browser and type http://192.168.3.1 in the URL bar.
Page 3
Getting to Know Push2TV Wirelessly mirror your Wi-Fi CERTIFIED Miracast™ or Intel WiDi enabled laptop, smartphone, or tablet. Now you can enjoy photos, videos, music, or any websites on your big-screen TV.
Connect with Intel WiDi To connect with Miracast devices, go to page 11. Step 1 Turn on your TV and select the correct HDMI input source. The Ready for connection screen displays on your TV.
Page 7
Step 2 On your laptop, launch the Intel WiDi software.
Page 8
Step 3 Use the Intel WiDi software to find and connect to Push2TV.
Page 9
Step 4 The first time that you connect your laptop to Push2TV, enter the security code on the TV in the Intel WiDi software on your laptop.
Page 10
Congratulations You are now displaying your laptop screen wirelessly on your TV.
Connect with Miracast To connect with Intel WiDi, go to page 6. Step 1 Turn on your TV and select the correct HDMI input source. The Ready for connection screen displays on your TV.
Page 12
Step 2 Find the wireless display app on your Wi-Fi CERTIFIED Miracast smartphone, laptop, or tablet. The name and location of the app might differ by device.
Page 13
Step 3 Use the wireless display software to find and connect to Push2TV.
Page 14
Step 4 Follow the instructions on your TV to do one of the following: Enter a security code. Press the Push2TV side button.
Page 15
Congratulations You are now displaying your smartphone screen wirelessly on your TV...
Page 16
Tips for Enjoying Push2TV • To display different content on the TV while you use your laptop, change the screen display setting on your laptop to extend mode. • You can mute your laptop and still watch videos with sound.
Page 17
Q What should I do if the TV stops showing my laptop screen? Use Intel Wireless Display software to check the wireless connection and reconnect to Push2TV. Also, try moving your laptop closer to the adapter or to a location with a clear line of...
Page 18
Q How can I restore the Push2TV factory settings? Use a paper clip to press and hold the Reset button for 10 seconds. About Wi-Fi CERTIFIED Miracast and Intel WiDi • For a list supported devices, visit www.netgear.com/landing/stream/tv/#push2tv#devices. • To check for the latest Intel WiDi software on your laptop, visit www.intel.com/go/wirelessdisplayupdate.
Page 19
Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. For product updates and web support, visit http://support.netgear.com.
Page 20
350 E. Plumeria Drive 201-15460-06 San Jose, CA 95134-1911 USA May 2013...