Configure The Intel Widi Properties; Modify The Intel Widi Behavior Properties - NETGEAR PTV3000 User Manual

Configure the Intel WiDi Properties

The Properties button is available on the WiDi Connected adapter screen only when Intel
WiDi is connected to an adapter. The Intel Wireless Display properties screen has two tabs:
Behavior and Adapter.
Multiple versions of Intel WiDi software exist, each with a slightly different look and feel. The
precise steps in the following procedure might differ for different Intel WiDi software versions.
However, the sequence of the steps should apply to all Intel WiDi software versions.

Modify the Intel WiDi Behavior Properties

The Intel WiDi adapter Behavior screen lets you configure Intel WiDi to be hidden (minimized)
after the Push2TV adapter has connected to the TV, stop warnings and prompts from
displaying, and change how the mouse pointer appears on the TV.

To modify the Intel WiDi behavior properties:
1. On your laptop, start Intel WiDi by clicking the Intel WiDi icon.
The Connected adapter screen displays. Intel WiDi now scans for an adapter. The status
shows Scanning for adapters. After the scan is complete, any adapters in range are
displayed in the Detected adapters table, including the Push2TV adapter.
2. Select the Push2TV adapter.
3. Click the Connect button.
Intel WiDi connects to the Push2TV adapter.
Push2TV Wireless Display Adapter PTV3000
Change the Intel WiDi Settings
22