NETGEAR A6100 - AC600 Dual Band Wireless AC Adapter Quick Start Manual

Also See for A6100:

Installation manual (2 pages)

User manual (38 pages)

Quick start (2 pages)

Table of Contents

Contents

1 Install the adapter software
2 Install the standalone driver
3 Join a WiFi network
4 View your connection status
5 Support and Community
6 Regulatory and Legal
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

NETGEAR A6100 - AC600 Dual Band Wireless AC Adapter Quick Start Manual

Install the adapter software

The adapter software allows you to connect the adapter to a WiFi network.

Visit https://www.netgear.com/support/download/?model=&model=A6100 and download the latest software file.
Unzip the files from the.zip file.
Double-click the file that ends in.exe and does not include Standalone in the file name.
Follow the prompts to complete installation.

Install the standalone driver

The standalone driver allows you to use your computer's built-in Windows WiFi network settings to connect the adapter to a WiFi network instead of using the adapter software.

Visit https://www.netgear.com/support/download/?model=&model=A6100 and download the latest software file.
Unzip the files from the.zip file.
Double-click the file that ends in.exe and includes Standalone in the file name.
Follow the prompts to complete installation.

Join a WiFi network

You can join a WiFi network using the adapter software, your computer's built-in Windows WiFi network settings, or Wi-Fi Protected Setup (WPS) if your WiFi router supports it.

Join a WiFi network using the adapter software

Make sure the adapter software is installed.
For more information, see Install the adapter software.
Insert the adapter into a USB port on your computer.
In the Windows system tray, click the icon to launch the adapter software.
Click the Join a Network button.
Select a WiFi network.
Click the Connect button.
If the WiFi network is secure, enter its password or network key. The adapter joins the WiFi network, which might take a few minutes.

Join a WiFi network using the built-in Windows WiFi network settings

Make sure the standalone driver is installed.
For more information, see Install the standalone driver.
Insert the adapter into a USB port on your computer.
Open the WiFi network settings on your computer and select a WiFi network to connect.
For more information about how to connect to a WiFi network using your computer, see the Microsoft Windows support site.

Join a WiFi network using WPS

Insert the adapter into a USB port on your computer.
Press and hold the WPS button on the adapter for two seconds.
Within two minutes, press the WPS button on your WiFi router or gateway. The adapter joins the WiFi network, which might take a few minutes. Your settings are saved in a profile.

View your connection status

You can view the WiFi connection status using the adapter icon that displays in your Windows system tray. To view details about the WiFi connection, open the adapter software.

The color of the icon indicates the strength of your WiFi connection:

White: Strong connection
Yellow: Weak connection
Red: No connection

If you remove your adapter, the adapter software becomes unavailable and the icon does not display. When you insert the adapter again, the icon returns.

Support and Community

Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com.

Regulatory and Legal

For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/.

See the regulatory compliance document before connecting the power supply.

For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacy-policy.

By using this device, you are agreeing to NETGEAR's Terms and Conditions at https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.

Applicable to 6 GHz devices only: Only use the device indoors. The operation of 6 GHz devices is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD
Floor 1, Building 3 University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland