NETGEAR PTV3000 User Manual page 15

You might see the following messages:
Message
The laptop status shows
Connecting... and the TV
screen shows Ready for
connection
The TV displays the message
Connected. Please wait for
more than 1 minute.
After a successful connection, the laptop and TV screen display the same images. You
are now ready to enjoy and share your pictures, videos, and music. The connection time
and start of screen mirroring vary depending on your WiFi environment.
6. (Optional) To move Intel WiDi out of the display area, use the Minimize button (_) instead of
the Close button (red X) in the upper right corner of the application window.
Note: For information about adjusting the settings on your TV, see
Chapter 4, Change the Intel WiDi
Note: For information about automatically connecting to an adapter after
the first connection has been made, see
Option on page 28.
Push2TV Wireless Display Adapter PTV3000
Solution
The connection failed. Do the following:
1. Click the Cancel connect button.
2. Try connecting again.
After the laptop connects to the Push2TV adapter, the TV displays the
message Connected. Please wait.
Note: If this solution does not work, a firewall might block the connection.
For more information, see
Intel WiDi is connected to the Push2TV adapter but the Push2TV adapter is
not connected to the TV. Do the following:
1. Click the Disconnect button to disconnect from the Push2TV adapter.
2. Try connecting again.
Note: If this solution does not work, see
page 37 and Common Solutions to Many Issues
Connect Using Intel WiDi
15
Resolve Firewall Issues
Troubleshoot the Initial Setup
Settings.
Configure the Autoconnect
on page 40.
on
on page 41.