Handset Vip Melody; Handset Registration; Handset Key Tone - GE DECT 0007634 User Manual

Handset VIP Melody

This features allow you to assign a specific melody to someone you want to get your
attention when the person calls. When a VIP melody is assigned and that person calls, the
unit rings the normal ring for the first ring and then follows with VIP melody ring. You may
choose from 15 different polyphonic melodies or 5 ringer tones.
NOTE: This feature ONLY works when the following conditions are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record previously transferred to the
memory. (Refer to Storing CID Records in Internal Memory). NO USER
MEMORY will show in the display to remind the user to do CID record
transfer first.
From the Ringer Menu:
1. Use the 5 or 6 buttons to scroll to VIP MELODY.
. Press the SELECT (SKL) to select.
3. Use the 5 or 6 buttons to scroll to the desired setting. You will hear a sample of the
ringer tone you select.
4. Press the SELECT (SKL) to confirm.
NOTE: Ringer Tone 1 through 5 are for dual tone ringer tone and
Melody 1 through 15 are for melodies.

Handset Key Tone

From the Ringer Menu:
1. Use the 5 or 6 buttons to scroll to KEY TONE. Press SELECT (SKL) to enter sub-menu.
. Use the 5 or 6 buttons to select ON, OFF.
3. Press the SELECT (SKL) to confirm.

Handset Registration

1. Make sure your phone is OFF (not in TALK mode).
. Press the MENU (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to REGISTRATION.
4. Press the SELECT (SKL) to confirm. PRESS INTERCOM ON BASE FOR 5S THEN PRESS OK
shows in the display.
5. Press and hold the INTERCOM/PAGE button on base unit until the charge/in use
indicator flashes, then press handset OK (SKL). PLEASE WAIT, REGISTING shows in the
display. HANDSET X REGISTERED shows in the handset display, where X is the handset
number. You will hear a confirmation tone.
If handset displays PLEASE REGISTER, press the OK (SKL) on the handset and repeat step
5 above.
6