One Ulse; Ase Et Ocal Rea Odes; Ase Ingers - GE DECT 0007634 User Manual

Tone/Pulse
You may program independently for LINE 1 and LINE .
1. Make sure your phone is OFF (not in TALK mode).
. Press the MENU (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to TONE/PULSE.
4. Press the SELECT (SKL) to confirm.
5. Use the 5 or 6buttons to scroll to LINE 1 or LINE 2 for setting Line 1 or Line .
6. Press the SELECT (SKL) to confirm.
7. Use the 5 or 6 buttons to select TONE or PULSE.
8. Press the SELECT (SKL) to confirm.
Base - Set Local Area Codes
You can progrom the way the Caller ID records are displayed, for up to five different codes
for your area. For example; if 7 digits is selected, the number will be displayed as xxx-xxxx,
and etc.
1. Make sure your phone is OFF (not in TALK mode).
. Press the MENU (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to SET AREA CODE .
4. Press the SELECT (SKL) to confirm.
5. Use the touch-tone pad to enter your 3-digit area code.
6. Press the DONE (SKL) to confirm the selection.
Base Ringers
You may program the following items independently for LINE 1 and LINE  under the
Ringer Menu; Ringer Volume, Ringer Tone, VIP Melody and Key Tone. To access the Ringer
Menu:
1. Make sure your phone is OFF (not in TALK mode).
. Press the MENU (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to RINGER.
4. Press the SELECT (SKL) to confirm.
5. Use the 5 or 6buttons to select LINE 1 or LINE 2 for setting Line 1 or Line .
6. Press the SELECT (SKL) to confirm.
17