Oom Onitor; All; H Andset - GE DECT 0007634 User Manual

Room Monitor
Room monitoring may be done from the base or the handset. Begin with unit you want to
monitor with (the microphone);
1. Make sure your phone is OFF (not in TALK mode).
. Press the MENU (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to ROOM MONITOR.
4. Press the SELECT (SKL) to confirm.
5. The list of registered units shows in the display.
6. Use the 5 or 6buttons to select the unit you wish to monitor.
7. Press the SELECT (SKL) to confirm.
8. The first unit will then turn on the microphone and the second unit will turn on
earpiece to monitor sound.
NOTE: Handsets can be on cradle or off cradle for room monitoring to
work.
NOTE: While in room monitoring mode, the listening unit will emit an
alert tone approximately every 4 seconds if there is an incoming call.
You may press the LINE 1 or LINE 2 button to quit room monitor and
answer the call.
NOTE: Press the CANCEL (SKR) or the END/CANCEL button to exit room
monitor mode.
Call Transfer
During an external call, you may transfer the external call from base to handset(s)
or vice versa.
NOTE: To cancel the call transfer, you may press END/CANCEL button or
int button on base.
1. Press the int button to put the line on hold. LX ON HOLD shows in the display, where X
is the Line number.
. Use the 5 or 6 buttons to select the desired handset or base. Press the SELECT (SKL)
to confirm.
NOTE: If you only have one handset registered in the system, it is
paged automatically.
3. Press the END/CANCEL button to transfer the call. TRANSFERRING FROM XXXX (where
XXXX is the name of the transferring unit) shows in the receiving unit's display.
4. Press the OK (SKL) on the receiving unit to answer the call.
3