Table of Contents
Advertisement
Wall Mounting the Base
1. Turn the base over.
. Slide the pedestal into the slots on the bottom of the base, and then push the pedestal
down until it snaps into place.
3. Slip the mounting holes on the pedestal over the wall plate posts and firmly slide the
unit into place. (Wall plate not included.)
Base Speakerphone Set Up
NOTE: Changing menu settings on the base will only change the
settings on the base and changing menu settings on the handset will
only change settings on the handset. For example, if you change the
language on the handset, it will not change the language on the base.
Speakerphone Volume
Use the VOLUME (5 or 6) buttons to adjust the speaker volume on the base to a
comfortable level during a call OR press the LINE 1 or LINE 2 button on the base and then
adjust the volume. VOL -1 is the minimum level and VOL-9 is the maximum.
Using the Soft Keys
On the base, there are two buttons under the display box which represent several Soft Key
(programmable) functions. Use these buttons to activate the Soft Key icons that appear
in the display. You may program the following items with the Soft Keys: Caller ID, Ringer,
Base Name, Date/Time, Set Language, Tone/Pulse, Room Monitor, Local Area Code and
Answerer Setup.
NOTE: During programming, you may press the END/CANCEL button at
any time to exit.
Turning the Answerer(s) On or Off
NOTE: The Mailbox Answerer(s) must be ON to hear the voice prompts.
1. Make sure your phone is OFF (not in TALK mode).
. Press the MENU (SKR) to go to the main menu.
3. Use the 5 or 6 buttons to scroll to ANSWERER SETUP.
4. Press the SELECT (SKL) to confirm.
5. Use the 5 or 6 buttons to select MAILBOX 1 or MAILBOX 2 for setting Mailbox 1 or
Mailbox .
6. Press the SELECT (SKL) to confirm.
7. Use the 5 or 6buttons to scroll to ANSWER ON/OFF.
8. Press the SELECT (SKL) to enter the menu. ANSWER ON/ANSWER OFF shows in
display.
14
Advertisement
Table of Contents
