Get Connected - Sierra Wireless 4G LTE Tri-Fi Hotspot Manual

Get Connected
Power Up the Device
If the device is not powered on, press and hold
the Power button
device for at least two seconds.
► The device will automatically activate. You will
see "Connect your computer to WiFi network" on
the display screen when it's finished.
Note: It can take several minutes for your device
to connect with the Sprint network.
on the front of the
Wirelessly Connect Your Computer
After it's activated, your Sierra Wireless™ 4G LTE
Tri-Fi Hotspot displays the device name and
password. You will need this information to
connect your Wi-Fi devices to the network.
Note: If your device is WPS-enabled, see Connect
WPS-enabled Devices.
1. From your computer, display the Wireless
Network Connections window, and then click
View Wireless Networks.
2. Select the network name displayed (for
example, SprintHotspot12), click Connect, and
enter your Wi-Fi password. (To display the
password, press the Navigation button
3. Launch your computer's Web browser.
4. Click The Internet or My Sierra Wireless™ 4G
LTE Tri-Fi Hotspot homepage to keep your
current settings, or click Set up my Sierra
Wireless™ 4G LTE Tri-Fi Hotspot and follow
the prompts to customize your setup.
.)