Handset Name - GE 28011 User Manual

NOTE: To restore the default setting to "---", press and
release the FLASH/DELETE button when SET AREA CODE
shows on the display.

Handset Name

This menu allows you to enter a name for the handset, which displays on
the idle screen.
From the PHONE SETTING menu;
DANIEL
HANDSET NAME HANDSET NAME
NOTE: If you make a mistake, use the FLASH/DELETE button
to backspace and delete one character at a time.
Deregistration
Deregistration cancels registration. During the deregistration process,
keep the handset near the base.
From the PHONE SETTING menu;
NO
YES
DEREGISTRATION DEREGISTRATION
WARNING: It is not recommended that a handset be
deregistered unless absolutely necessary because once a
handset is deregistered, that handset's telephone features
cannot be used until the handset is re-registered.
1
1. Use the 6 or 5 button to scroll to
HANDSET NAME.
. Press the SELECT button to enter the menu.
3. Use the number keys to enter a name (up to
15 characters). More than one letter is stored
in each of the number keys. For example, to
enter Bill Smith, press the  key twice for the
letter B. Press the 4 key 3 times for the letter
I. Press the 5 key 3 times for the letter L. Wait
for 1 second, press the 5 key 3 times for the
second letter L, and press the 1 key to insert
a space between the first and last name.
Press the 7 key 4 times for the letter S; press
the 6 key once for the letter M; press the 4
key 3 times for the letter I. Press the 8 key
for the letter T; press the 4 key twice for the
letter H.
4. Press the SELECT button to save your
selection. You will hear a confirmation tone.
1. Use the 6 or 5 button to scroll to
DEREGISTRATION.
. Press the SELECT button to enter the menu.
3. Use the 6 or 5 button to scroll to NO or
YES. The default is NO.