GE 28011 User Manual page 37

Optional/additional 5.8ghz color handset for use only with system 28031, tc28031, 28041 or tc28041 series
Hide thumbs Also See for 28011:
Table of Contents

Advertisement

ENTER NAME
ENTER NUMBER
HANDSET NAME
HANDSET NEEDS
REGISTRATION
INCOMPLETE DATA
LINE IN USE
LONG DISTANCE
LOW BATTERY
NEW
NEW CALL XX
NO CALLS
NO DATA
OUT OF RANGE
PAGING or
PAGING FROM
PLEASE REGISTER
REPEAT
SEARCHING
SPEAKER
UNKNOWN CALLER/
NAME/NUMBER
Prompt telling you to enter the name in one of
the 50 memory locations.
Prompt telling you to enter a telephone number
in one of the 50 memory locations.
Prompt telling you to enter the user name for the
registered handset.
Indicates you must register a non-registered
handset prior to use.
Caller information is interrupted during
transmission or the phone line is
excessively noisy.
Displays on handset while the line is in use.
Indicates CID record is from a long distance call.
Indicates the battery needs to be charged.
Indicates call or calls have not been reviewed.
XX represents the number of new CID records
not reviewed.
Indicates there are no CID records in memory.
No Caller ID information was received.
May indicate handset is too far away from the
base or that
the power has been interrupted. Move closer
and check connections.
Someone pressed the PAGE button on the base
or INT
button on the handset
Indicates the handset needs to be registered
before use.
Repeat call message. Indicates that a new call
from the same number was received more than
once.
Indicates handset is searching for the base.
Indicates the handset is in speakerphone mode.
The incoming call is from an area not serviced by
Caller ID or
the information was not sent.
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

28041 series28031 seriesTc28031 seriesTc28041 series

Table of Contents