Table of Contents
Advertisement
4. Insert the new battery pack and connect the cord to the jack inside the
battery compartment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge. Allow
the handset battery to properly charge (for 16 hours) prior to first
use or when you install a new battery pack. If you do not properly
charge the phone, battery performance will be compromised.
Battery Safety Precautions
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• To reduce the risk of fire or personal injury, use only the Nickel-metal
Hydride battery listed in the User's Guide.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
NOTE: The RBRC seal on the battery used in your Thomson Inc. product
indicates that we are participating in a program to collect and recycle the
rechargeable battery (or batteries).
For more information go to the RBRC web site at www.rbrc.org
or call 1-800-8-BATTERY or contact a local recycling center.
Display Messages
The following indicators show the status of a message or of the unit.
ANSWERER REMOTE
ACCESS
BLOCKED NUMBER
CHARGING...
DELETE ALL?
DELETE CALL ID?
DELETE?
END OF LIST
36
Indicates the answering system is being
accessed remotely.
The person is calling from a number that has
been blocked from transmission.
Indicates the handset need to charge for a
period of time before it can resume normal
function.
Prompt asking if you want to erase all Caller ID
records.
Prompt asking if you want to erase the Caller ID
record that is shown on the display.
Prompt asking if you want to erase one of the 50
records stored in the phone's memory.
Indicates that there is no additional information
in Caller ID memory.
Advertisement
Table of Contents
