HP ProLiant DL2000 Specification page 45

QuickSpecs
Technical Specifications
HP Smart Array B110i
SATA RAID Controller
Emissions Classification
(EMC)
Simultaneous drive
transfer channels
Transfer rate
synchronous
(maximum theoretical)
Data transfer method
Drive support
Data transfer modes
Protocol
Feature
RAID levels supported
RAID Features
RAID OS Support
DA - 13847 North America — Version 31 — December 13, 2013
HP ProLiant DL2000 Multi Node Server
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109). The listed sound levels apply to minimally
populated shipping configurations. Additional options may result in increased
sound levels.
Node type
Idle
L
WAd
L
pAm
Operating
L
WAd
L
pAm
FCC Rating
Normative Standards
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and statements.
4 channels
1.5 Gb/s
Intel® ICH10R
Serial ATA
Legacy Mode
Combined Mode
Serial ATA
NCQ (Native Command Queuing); AHCI (Advanced Host Controller Interface)
0, 1, 10
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support
NOTE: Hot-Plug functions require the purchase of the HP Smart Array Hot Plug
Advance Pack for B110i.
Microsoft Windows Server 2003 x32 and x64 Editions
Microsoft Windows Server 2008 x32 and x64 Editions.
Red Hat Enterprise Linux 4 (x86)
Red Hat Enterprise Linux 5 (x86)
Red Hat Enterprise Linux 5 (AMD64/EM64T)
SUSE Linux Enterprise Server 10 (x86)
1U 2U
6.4 B 6.5 B
47 dBA 48 dBA
6.4 B 6.5 B
47 dBA 48 dBA
Class A
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;
ICES-003; CNS13438; GB9254; K22;K24; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
Page 45