Table of Contents
Advertisement
QuickSpecs
Core Options
HP Memory
HP Hard Drives
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series
processors.
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power
Memory Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series
processors.
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration
Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LV include Low Power DIMMs. For more information on ProLiant
Energy Efficient Features, see:
NOTE: PC3L is a low voltage memory.
NOTE: Memory DIMM blanks are required in any empty DIMM slots for proper cooling. If
DIMMs are removed or the memory configuration is changed, all DIMM slots must be
populated with either a blank or a DIMM.
NOTE: There is a maximum support limitation of 8 ranks per memory channel
(maximum of 2 quad rank DIMMs per channel)
NOTE: Memory Min and Max depends on number of processors and type of memory:
1.
Processor -> R-Dimm: Min 1 // Max 8 U-Dimm: Min 1 // Max 6
2.
Processors -> R-Dimm: Min 2 // Max 16 U-Dimm: Min 2 // Max 12
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: To support HP hard drives exceeding 2.2 TB, HP Smart Array Firmware version
5.0 or later is required for the following controllers:
HP Smart Array P212 Controller
HP Smart Array P410 Controller
HP Smart Array P411 Controller
DA - 13847 North America — Version 31 — December 13, 2013
HP ProLiant DL2000 Multi Node Server
www.hp.com/go/proliant-energy-efficient
500656-B21
500658-B21
593339-B21
604504-B21
500666-B21
500662-B21
604506-B21
500670-B21
500672-B21
Page 23
Hide quick links:
Advertisement
Table of Contents
