QuickSpecs
System Specifications
Power
ProLiant DL170e G6 Fully Configured
Fully Loaded System Input Wattage (W)
Fully Loaded System Input Current (A rms)
Fully Loaded System Thermal (BTU- Hr)
Fully Loaded System VA (Volt-Amp)
System Leakage with all power supplies loaded
(mA)
System Inrush Current with all power supplies
loaded (A)
Power cord requirements
NOTE: Power shown is for a fully configured system consisting of (2) CPUs, (16) DIMMs, (2) HDDs, and (1) PCI card per node.
Power Cord
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: ProLiant DL servers are primarily connected to PDU's in data center racks so they ship standard with
only a PDU power cord (416151-B21).
NOTE: If customers require a power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
DA - 13847 North America — Version 31 — December 13, 2013
HP ProLiant DL2000 Multi Node Server
115V/60Hz
651
5.7
2218
657
1.58
19
Nema 5-15P to IEC320-C13
220V/50Hz
638
3.0
2174
657
3.03
37
IEC320-C13 to IEC320-C14
AF556A
Page 43