HP ProLiant BL620c Specification page 9

Generation 7 server blade
Table of Contents

Advertisement

QuickSpecs
Standard Features
Warranty:
a forwarded clock failure.
QPI Self-Healing enables a QPI link to map a failed lane and downshift from full to ½ width (or ½
width to ¼ width) QPI link if there are errors on the link.
QPI Cycle Redundancy Checking (CRC) automatically detects data errors using a checksum of either
8 bits or 16 bits.
QPI Poisoning tags an erroneous packet with a "poisoned bit" on the QPI fabric.
QPI Lane Failover identifies a faulty lane within data paths removing them from operation reducing
command/address errors.
Server Blade Enclosure Infrastructure
Up to 10 hot-plug redundant Active Cool fans per enclosure.
Up to 6 hot-plug high efficiency redundant power supplies per enclosure.
Dual grid power providing redundant rack enclosure power feeds to the enclosure.
Up to eight interconnect modules per enclosure providing four simultaneous redundant fabrics for
FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, iSCSI, SAS, etc.
Optional enclosure redundant Onboard Administrator system management module.
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available
for three years from date of purchase. Support for software and initial setup is available for 90 days from
date of purchase. Enhancements to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may
be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13747 Worldwide — Version 35 — December 13, 2013
HP ProLiant BL620c Generation 7 (G7) Server Blade
Page 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant bl620c generation 7Proliant bl620c g7

Table of Contents