Standard Features - HP ProLiant BL680c Specification
Hp proliant bl680c generation 7 (g7) server blade
Hide thumbs
Also See for ProLiant BL680c:
- User manual (111 pages) ,
- Configuration (23 pages) ,
- Introduction manual (13 pages)
Table of Contents
Advertisement
QuickSpecs
Standard Features
This document covers the HP ProLiant BL680c G7 server blade only. For more information on the HP BladeSystem c-Class Enclosure
and HP BladeSystem c-Class Interconnect and Mezzanine components, please see the following:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are supported in the
new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are supported in the
new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processors
One or more of the
following depending on
model
NOTE: All processors within the server must be identical.
NOTE: The server supports two, three, or four processors. One processor is not supported.
NOTE: The minimum processor configuration is two processors that must be installed in socket CPU1 and
CPU3.
NOTE: If upgrading an existing BL680c G7 server to a different processor, the server's ROM must be
flashed to the latest BIOS prior to the upgrade.
NOTE: All processors support Intel® Hyper-threading.
NOTE: All processors support Intel® Turbo Boost Technology except the E7-4807.
NOTE: Intel® Xeon® E7-4800/8867L series processors cannot be used to upgrade a ProLiant BL680c G7
server blade with Intel® Xeon® 6500/7500 series processors.
Ten-Core Processors
Intel® Xeon® E7-4870 (2.40GHz/10-core/30MB, 6.40GT/s QPI, 130W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Intel® Xeon® E7-4860 (2.26GHz/10-core/24MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® E7-4850 (2.00GHz/10-core/24MB, 6.40GT/s QPI, 130W) Processor
Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB, 6.40GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Eight-Core Processors
Intel® Xeon® E7-4830 (2.13GHz/8-core/24MB, 6.40GT/s QPI, 105W) Processor
Intel® Xeon® E7-4820 (2.0GHz/8-core/18MB, 5.86GT/s QPI, 105W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
Six-Core Processors
Intel® Xeon® E7-4807 (1.86GHz/6-core/18MB, 4.80GT/s QPI, 95W) Processor
NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details.
DA - 13742 North America — Version 35 — December 13, 2013
HP ProLiant BL680c Generation 7 (G7) Server Blade
Page 2
Advertisement
Table of Contents
