Pre-Configured Models - HP ProLiant BL680c Specification

QuickSpecs

Pre-Configured Models

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
HP ProLiant BL680c G7 E7-
4860 2P 64GB-R Server
643780-B21
HP ProLiant BL680c G7 E7-
4850 2P 64GB-R Server
643781-B21
HP ProLiant BL680c G7 E7-
4830 2P 64GB-R Server
643782-B21
Processor(s)
One of the following
depending on Model
Cache Memory
Memory
Network Controllers
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
DA - 13742 North America — Version 35 — December 13, 2013
HP ProLiant BL680c Generation 7 (G7) Server Blade
(2) Intel® Xeon® E7-4860 (2.26GHz/10-core/24MB, 6.40GT/s QPI, 130W)
Processors
(2) Intel® Xeon® E7-4850 (2.00GHz/10-core/24MB, 6.40GT/s QPI, 130W)
Processors
(2) Intel® Xeon® E7-4830 (2.13GHz/8-core/24MB, 6.40GT/s QPI, 105W)
Processors
24MB L3 cache
64GB (8 x 8GB) DDR3-1333 RDIMMs (operating up to 1066MHz)
NOTE: Total 64 DIMM slots.
Six (6) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine,
hardware-based accelerated iSCSI, and iSCSI boot
One (1) 10/100 network adapter port dedicated to iLO 3 Management
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0,
1, and 1+0
NOTE: The P410i is configured with no cache allowing the end user to select
the desired cache option (if cache is desired in the first place). This provides
RAID 0, 1 and 1+0 in the standard configuration. However, options are
available to add RAID 5 and 6; see the "Optional Upgrades" section for P410i
options.
NOTE: RAID 0, 1, and 1+0 are supported on the P410i without the need for a
cache option.
Four (4) slots for battery cache options.
NOTE: The server supports up to a combined total of four (4) battery cache
options for the P410i and/or optional Smart Array RAID controllers.
No drives included; supports up to four (4) hot-plug SFF SAS/SATA/SSD drives
SAS: 4.8TB; SATA: 4.0TB; SAS SSD: 3.2TB; SATA SSD: 1.6TB
None
Up to 2 blades in the HP BladeSystem c3000 enclosure
Up to 4 blades in the HP BladeSystem c7000 enclosure
Page 15