Table of Contents
Advertisement
16 Security slot
This security slot is compatible with the Kensington security
cables.
17 <MAIN POWER> switch
Turns on/off the main power.
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel
1
Power standby <v> button
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in projection mode.
2
Power on <b> button
Starts projection when the <MAIN POWER> switch on the
projector is set to <ON> when the power is switched off
(standby mode).
3
<VIDEO> button
Switches the input to VIDEO.
4
<RGB1/RGB2> button
Switches the input to RGB.
5
<DVI-D> button
Switches the input to DVI-D.
6
<HDMI> button
Switches the input to HDMI.
7
<DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8
<SDI> button
Switches the input to SDI.
(Only for PT-DZ870U)
Chapter 1 Preparation — About your projector
1
2
3
4
5
6
7
8
18 <AC IN> terminal
Connect the supplied power cord.
19 Burglar hook port
Attaches a burglar prevention cable, etc.
9
10
11
12
13
14
9
<MENU> button
Displays or hides the main menu. (x page 65)
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least
three seconds while the on-screen display is off, the on-screen
display is turned on.
10 <LENS> button
Adjusts the focus, zoom, and shift (position) of the lens.
11 <ENTER> button
Determines and executes an item in the menu screen.
12 <SHUTTER> button
Used when temporarily turning off the image. (x page 61)
13 asqw buttons
Use to select items in the menu screen, change settings, and
adjust levels.
Also used to enter a password in [SECURITY] or enter
characters.
14 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image. [PROGRESS] is displayed on the screen during
automatic adjustment. (x page 63)
ENGLISH - 27
Hide quick links:
Advertisement
Table of Contents
