Table of Contents
Advertisement
Precautions for use
rAsk a qualified technician or your dealer when installing the interface board to the
Multi Window Processor.
Be sure to ask a qualified technician or your dealer when installing the interface board to the Multi Window Processor. Static
electricity may cause malfunctions.
rInterface board for input and output
To use the Multi Window Processor, you need to install at least one interface board for input and one interface board for output.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
Product list
Product name
Interface Board for DVI-U
2input
Interface Board for DVI-U
2output
Interface Board for 3G-SDI
2input
Interface Board for HD/SD-
SDI 4input
Interface Board for Digital
Link 2output
Installing the interface board
Be sure to ask a qualified technician or your dealer.
r To the equipment installer:
Before you begin, make sure to read "Read this first!" (x page 2).
Precautions for installing and removing the interface board
f Make sure to turn off the power before attaching or removing the interface board to/from the Multi Window Processor.
f Do not touch the connecting part of the interface board directly.
g Doing so may result in static electricity that damages components.
f To prevent damage by static electricity, touch a metal object nearby to remove electrostatic charge on your body before you begin.
f Be careful to avoid injury when installing or removing the interface board.
g If touched by mistake, lead lines of parts, traces of soldering, and other sharp areas on the surface of the interface board may cause
injury to the hand.
g If touched by mistake, empty slot openings on the Multi Window Processor and edges of the interface board brackets may cause injury to
the hand.
f Install the interface board to the Multi Window Processor by slowly and securely inserting it horizontally into the connector.
g Incorrect attachment may result in failure to operate or malfunction.
4 - ENGLISH
Precautions for use
Model No.
ET-MCYDV100
ET-MCQDV150
ET-MCYSD200
ET-MCYSD210
ET-MCQDL350
This is the interface board with 2 inputs for DVI-U signals.
This is the interface board with 2 outputs for DVI-U signals.
This is the interface board with 2 inputs for 3G-SDI signals.
This is the interface board with 4 inputs for HD/SD-SDI signals.
This is the interface board with 2 outputs for DIGITAL LINK
signals.
Remarks
Advertisement
Table of Contents
