Table of Contents
Advertisement
Lamp Power Mode
J
Selects desired lamp power mode under
z
different situations.
1 )
Press ▲▼ to select [Lamp Power Mode].
2 )
Press ► to display the setting dialog box.
3 )
Press ◄► to select the desired item.
Normal
Normal brightness.
Brightness according to the input
AUTO
signal.
Lower brightness reduces the lamp
ECO
power consumption and extends
the lamp life.
Note
When set to [ECO], you can extend the power savings,
z
reduced operating noise, the service life of the lamp.
When there is no signal for more than 5 minutes, the
z
lamp power will be decreased automatically for power
saving.
Clear Lamp Hours
J
Reset the lamp usage time after replacing the
z
lamp unit.
1 )
Press ▲▼ to select [Clear Lamp Hours].
2 )
Press ► to display the setting dialog box.
3 )
Press
▲▼ to switch [Yes]/[No].
4 )
Press ► to execute.
High Altitude
Set to [On] when the projector is used at elevation
approx. 1 000 m (3 300 ft) and approx. 3 000 m
(10 000 ft).
1 )
Press ▲▼ to select [High Altitude].
2 )
Press ► to display the adjustment
dialog box.
3 )
Press ◄► to switch [On]/[Off].
For the elevation approx. 1 000 m
On
(3 300 ft) and approx. 3 000 m
(10 000 ft).
For the elevation below approx.
Off
1 000 m (3 300 ft).
Note
When [On] is selected, the speed and the noise of the
z
fan will increase.
Information
Displays the input signal source and setting state
information of the projector.
1 )
Press ▲▼ to select [Information].
2 )
Press ► to display the information
dialog box.
Displays [Model Name], [Source], [Resolution],
z
[Software Version], [Color Space] and [Aspect
Ratio].
Options
41
ENGLISH -
Advertisement
Table of Contents
