Table of Contents
Advertisement
Setting the restart option
Set the conditions for restarting signage playback (schedule) that has been stopped.
1)
Press as to select [SIGNAGE].
2)
Press the <ENTER> button.
3)
Press as to select [POWER] or [IMAGE CONTENT].
[POWER]
[IMAGE CONTENT]
4)
Press qw to select [DISABLE] or [ENABLE].
[DISABLE]
[ENABLE]
Note
f When [PLAY MODE] is set to [SLIDESHOW], [POWER] and [IMAGE CONTENT] in the restart option cannot be selected.
f Signage playback will not be restarted if an SD card is not inserted or no schedule is registered in the SD card.
f Signage playback can be restarted also by pressing the <SIGNAGE> button on the remote control. Pressing the <SIGNAGE> button
while signage playback is stopped switches the input to signage and restarts or starts signage playback. In addition, pressing each of the
<HDMI>, <MEMORY VIEWER>, <Miracast>, <Panasonic APP>, or <LIGHTING/PROJECTOR> button while in signage playback stops
signage playback and switches the input or projection mode to a corresponding one.
[HIGH ALTITUDE MODE]
Set this item to other than [OFF] when using the projector at high altitudes between 1 000 m (3 281') and 2 700 m (8 858') above sea level.
1)
Press as to select [HIGH ALTITUDE MODE].
2)
Press the <ENTER> button.
f The [HIGH ALTITUDE MODE] screen is displayed.
3)
Press as to select an item, and press the <ENTER> button.
[OFF]
[HIGH1]
[HIGH2]
4)
When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f The speed of the internal cooling fan increases and the operation sound becomes louder when [HIGH1] or [HIGH2] is set.
[ECO MANAGEMENT]
This function optimizes power according to the operating status to reduce power consumption.
Setting [LIGHT POWER]
1)
Press as to select [ECO MANAGEMENT].
2)
Press the <ENTER> button.
f The [ECO MANAGEMENT] screen is displayed.
3)
Press as to select [LIGHT POWER].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
72 - ENGLISH
Chapter 4 Settings — [SETUP] menu
The signage playback (schedule) restarts and the input switches to the signage when the power is
turned off/on as registered in a schedule or the power is controlled with the power <v/b> button on
the remote control or a command.
The signage playback (schedule) restarts and the input switches to the signage at the start time
of a image content (still images/movies/external input contents/playlists in SD card) that is set as
schedule.
Disables the restart option.
Enables the restart option.
Select this item when using the projector at a location lower than 1 000 m (3 281') above sea level.
Select this item when using the projector at a location between 1 000 m (3 281') and 2 000 m (6 562')
above sea level.
Select this item when using the projector at a location between 2 000 m (6 562') and 2 700 m (8 858')
above sea level.
Advertisement
Table of Contents
