Connecting Terminals - Panasonic PT-LX300E Operating Instructions Manual

Connecting terminals

(1) <HDMI IN> Input
Connects to HDMI input signals.
(2) <COMPUTER IN>
Connects to COMPUTER IN input signal.
(3) <VIDEO IN>
Connects to VIDEO IN input signal.
(4) <SERIAL IN>
Connects to a computer via an RS-232C cable.
(5) <MONITOR OUT>
Outputs COMPUTER signals input to the projector.
(6) <AUDIO IN>
Connects to AUDIO IN signal.
(7) <VARIABLE AUDIO OUT>
Outputs the audio signals input to the projector.
2
1
3
About Your Projector
5 6
4
7
Note
When the <HDMI IN> terminal is connected to a computer
z
via a HDMI-DVI conversion cable, it can only input video
signal and the analog audio signal can not be input.
17
ENGLISH -