Handset Keys Configuration; Web Interface - RCA IP160 Operation Manual

Base:
Hold down the page key for 10 seconds. Then release the key. Press the key again.
The settings in base will go back to factory default.
Firmware upgrade
Handset:
Go to the menu "System" [ "Firmware Upgrade". The phone will check the avail-
ability of new software version. If new firmware is available, a popup window will
ask "New Firmware is available. Upgrade now?" Select "Yes" soft key will auto-
matically proceed with the software upgrade.
Base:
Open the web page of the base. Go to the menu "Servicing" [ "Upgrades" [
"Base Upgrade". Press the "Browse" button to enter input the firmware file. Press
the "Upgrade Firmware" button. The base software upgrade will proceed.
Display settings
On the handset, go to the menu "Settings" [ "Display".
User can configure backlight timeout, LCD brightness, screen saver and wallpaper.

Handset Keys configuration

Programmable keys
Speed Dial Keys:
On the handset, user can program 0-9 keys as speed dial key. Go to the menu
"Services" [ "Speed Dial". Select a key to program the number and decide which
account will make the call.

Web Interface

Administrators can configure the phone system settings through the web inter-
face. This section will describe how to use the web interface to access the phone
settings.
Administrators need to know IP address of the base prior to accessing the inter-
face. Please refer to the section Get the base IP address.
On the PC, open a web browser and enter the IP address (e.g.
http://192.168.1.155) of the base. Username and password is required to access
the web pages. The default values are "admin" and "0000" respectively.
21 20