Lexmark CX310 User Manual page 180

Troubleshooting
Close flatbed cover and load originals if restarting job [2yy.xx]
From the printer control panel, try one or more of the following:
•
Select Scan from automatic feeder, and then press
last successful scan job.
•
Select Scan from flatbed, and then press
last successful scan job.
• Select Finish job without further scanning, and then press
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
•
Select Restart Job, and then press
•
Select Cancel Job, and then press
[Color] cartridge low [88.xy]
You may need to order a toner cartridge. If necessary, select Continue to clear the message and continue printing. For
non‑touch‑screen printer models, press
[Color] cartridge nearly low [88.xy]
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press
[Color] cartridge very low, [x] estimated pages remain [88.xy]
You may need to replace the toner cartridge very soon. For more information, see the "Replacing supplies" section of
the User's Guide.
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press
Complex page, some data may not have printed [39]
Try one or more of the following:
•
From the printer control panel, select Continue to ignore the message and continue printing. For non‑touch‑screen
printer models, press
•
Cancel the current print job. For non‑touch‑screen printer models, press
•
Install additional printer memory.
to continue scanning from the scanner glass immediately after the
to restart the scan job with the same settings from the previous scan job.
to clear the message and cancel the scan job.
to confirm.
to confirm.
to confirm.
to confirm.
to continue scanning from the ADF immediately after the
to end the last successful scan job.
to confirm.
180