Replace Jammed Originals If Restarting Job - Lexmark CX310 User Manual

Troubleshooting
• Select Finish job without further scanning, and then press
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
•
Select Restart Job, and then press
•
Select Cancel Job, and then press
Replace defective [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the defective imaging kit to clear the message and continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then see the "Ordering supplies" section of the User's Guide or
visit www.lexmark.com.

Replace jammed originals if restarting job.

From the printer control panel, try one or more of the following:
•
Select Scan from automatic feeder, and then press
last successful scan job.
•
Select Scan from flatbed, and then press
last successful scan job.
•
Select Finish job without further scanning, and then press
Note: This does not cancel the scan job. All successfully scanned pages will be processed further for copying or
e-mailing.
• Select Restart Job, and then press
•
Select Cancel Job, and then press
Replace maintenance kit, 0 estimated pages remain [80.xy]
The printer is scheduled for maintenance. For more information, visit the Lexmark support Web site at
http://support.lexmark.com
Replace missing [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Install the indicated imaging kit to clear the message. For more information, see the "Replacing supplies" section of
the User's Guide.
to restart the scan job with the same settings from the previous scan job.
to clear the message and cancel the scan job.
to continue scanning from the scanner glass immediately after the
to restart the scan job with the same settings from the previous scan job.
to clear the message and cancel the scan job.
or contact your service representative, and then report the message.
to end the last successful scan job.
to continue scanning from the ADF immediately after the
to end the last successful scan job.
188