Configuring Supply Notifications From The Embedded Web Server - Lexmark CX310 User Manual

Cx310 series
Hide thumbs Also See for CX310:
Table of Contents

Advertisement

Managing the printer
Notes:
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Reports, and then click the type of report you want to view.
Configuring supply notifications from the Embedded Web
Server
You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach their
end‑of‑life by setting the selectable alerts.
Notes:
You can select alerts for toner cartridges, imaging kit, maintenance kit, and waste toner bottle.
All alerts can be set for nearly low, low, and very low supply conditions. Not all alerts can be set for the
end‑of‑life supply condition. E‑mail alert is available for all supply conditions.
The percentage of estimated remaining supply that prompts the alert can be set on some supplies for some
supply conditions.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Print Settings > Supply Notifications.
3
From the drop‑down menu for each supply, select one of the following notification options:
Notification
Off
E‑mail Only
Warning
1
Continuable Stop
Non Continuable Stop
1
The printer generates an e-mail about the status of the supply when supply notification is enabled.
2
The printer stops when some supplies become empty to prevent damage.
4
Click Submit.
Description
The normal printer behavior for all supplies occurs.
The printer generates an e-mail when the supply condition is reached. The status of the
supply appears on the menus page and status page.
The printer shows the warning message and generates an email about the status of the
supply. The printer does not stop when the supply condition is reached.
The printer stops processing jobs when the supply condition is reached. The user needs to
press a button to continue printing.
1,2
The printer stops when the supply condition is reached. The supply must be replaced to
continue printing.
161

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx211Cx231

Table of Contents