Print Is Too Light - Lexmark CX310 User Manual

Troubleshooting
Action
Step 5
Check if the paper loaded in the tray has texture or rough finishes.
Are you printing on textured or rough paper?
Step 6
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in
its original wrapper until you use it.
b
Resend the print job.
Is the print still too dark?
Step 7
Replace the imaging kit, and then resend the print job.
Is the print still too dark?

Print is too light

Action
Step 1
a
From the Quality menu on the printer control panel, select Color
Adjust.
b
Resend the print job.
Is the print still too light?
Step 2
a
From the Quality menu on the printer control panel, increase the toner
darkness.
Note: 4 is the factory default setting.
b
Resend the print job.
Is the print still too light?
Yes No
From the printer Go to step 6.
control panel, set the
paper texture in the
Paper menu to match
the paper loaded on
the tray.
Go to step 7. The problem is solved.
Contact customer The problem is solved.
support.
Yes No
Go to step 2. The problem is solved.
Go to step 3. The problem is solved.
212