Device Configuration Set [B1H, Sub 03H] - Hitachi DK23FB-60 - Travelstar 60 GB Specifications

6.3.2.11.4 Device Configuration Set [B1h, Sub 03h]

Task File Registers
Command
Cylinder High
Cylinder Low
Device/Head
Sector Number
Sector Count
Features
DRV : Device selection bit
The DEVICE CONFIGURATION SET command allows a device manufacturer or a personal computer
system manufacturer to reduce the set of optional commands, modes, or feature sets supported by a device
as indicated by a DEVICE CONFIGURATION IDENTIFY command. The DEVICE CONFIGURATION SET
command transfers an overlay that modifies some of the bits set in the IDENTIFY DEVICE command
response. When the bits in these words are cleared, the device no longer support the indicated command,
mode, or feature set. If a bit is set in the overlay transmitted by the device that is not set in the overlay
received from a DEVICE CONFIGURATION IDENTIFY command, no action is taken for that bit.
The format of the overlay transmitted by the device is described in table 6.19.
Word
0 Data Structure Revision
Word 0 shall contain the value 0001h.
1 Multiword DMA modes supported
bit 15 - 3 0 = Reserved
bit 2
bit 1
bit 0
K6610007
Rev.5
02.14.'03
7
-
Table 6.19 Device Configuration Set Command Data Structure
1 = Multiword DMA mode 2 and below are supported
Bit 2 is cleared to select no support for Multiword DMA mode 2. This bit shall
not be cleared if Multiword DMA mode 2 is currently selected.
1 = Multiword DMA mode 1 and below are supported
Bit 1 is cleared to select no support for Multiword DMA mode 1. This bit shall
not be cleared if Multiword DMA mode 2 is supported or Multiword DMA mode
1 or 2 is selected.
1 = Multiword DMA mode 0 is supported
Bit 0 shall not be cleared.
6 5 4 3
B1h
XX
XX
X - DRV
XX
XX
03h
0 : DRV0 1:DRV1
Description
- 92 -
2 1 0
XX