Before You Call For Service - GE Monogram ZEU30R Owner's Manual

Save time
and money!
22
PROBLEM
PAN DETECTION
OR SIZING NOT
WORKING
PROPERLY
TEMP LTD APPEARS
IN THE DISPLAY
SURFACE UNIT IS
GLOWING HOT
WHEN IT SHOULD
BE ON A LOW
POWER SETTING
SURFACE UNIT IS
NOT GLOWING
RED
"F" AND A NUMBER
APPEAR IN THE
DISPLAY AND THE
COOKTOP BEEPS

Before You Call For Service...

POSSIBLE CAUSE
• Improper cookware being used. Use a flat, metallic pan that is 4.0"
or larger.
• Pan is improperly placed. Make sure that the pan is centered on the
corresponding surface unit.
• Time-Out feature activated. Allow the surface unit(s) to
cool for 1/2 to 1 hour before using again.
• Cooktop feature activated. The cooktop has a rapid heat-up feature
and is designed to do this.
• The surface units will only be visibly red at power levels 6–H. At power
levels L–5, the red glow is not visible but the surface unit is working
properly. After changing a surface unit from a higher power level to
a lower power level, the red glow may disappear temporarily in order
to quickly achieve the desired temperature. If the new power setting
is greater than 5, the red glow should reappear within several minutes.
• You have a function error code. Write down the "F:- - -" and
touch the (CONTROL LOCK) pad. Disconnect power to
the cooktop and then reconnect. If an F-code appears again, call
for service.
Radiant Cooktop