Advertisement
to Set The Gtiddle Controls
How
this prevents the heating element from being turned
on awidentily. Push the knob in ody when it is in
the OFF position. men the knob is in any other
position, it m be turned without pushing it in.
Automatic Blower Operation
The blower comes on automatidly when the @dde is turned on and turns
off automatidly when the gridde is turned off.
Griddle Tips
Most gridded foods require cooking on a preheated
surface, which may be greased lighdy before adding
food. Preheat gridde 5 minutes or less at HI setting,
then switch to recommended mok setting.
If your house has low voltage, foods may be
lighter brown than expected.
and gridde time maybe needed to get good
rooking restits.
Make sure the gridde is clean.
Check the grease wllector jar and empty if
necessary to avoid spillovers.
To avoid damaging the nonstick finish, store the
to store it flat, avoid placing other pans or utensfls
on top.
Foods which are high in natural fat, such as bacon
or sausage, maybe started on a mld gridde.
longer preheating
A
Front and rear sections of the griddle heating
element are controlled separately. Heat ody hdf
the gndde surfa~ for cooking small portions or set
each hdf at a different temperature for rooking
different types of foods.
Push in the control knob depending on which side of
the cooktop gridde module is used. me right front
and right rear control knobs mntrol the gridde when
the module is on the right side (on some models).
The left front and left rear control knobs operate the
the cooktop.
The blower mmes on autornatidly when the
when the gridde is turned off.
Avoid using metal utensils with sharp points or
rough or sharp edges which might damage the
nonstick coated gridde surface. Do not cut foods
on the @dde.
Foods to be warmed may be placed directiy on the
inverted ketie, placed over them wdl help store
the heat.
23
Advertisement
