Advertisement
How to hseti the Module
Be sure the controls are turned
1.
to OFF. To install the module,
position the plug to the outside
How to Remove the Module
Be sure the controls are turned to OFF and the
1.
surface units are cool before attempting to remove
the module.
2. Lift up the tab at the inside edge of the modde
until the base clears the opening at the side of
the cooktop.
Use medium- or heavy-weight mohare. Auminum
cookware conducts heat faster than other metals.
Cast-iron and mated cast-iron cookware are slow to
absorb heat but generally cook evedy at low to
medium heat settings. Steel pans may cook unevedy
if not combined with other metis.
For best rooking restits pw shotid be flat on the
bottom. Match the stie of the saucepan to the she of
the surfa~ unit. The pan should not esend over the
edge of the surface unit more than 1 inch.
instructions on mokware use.
10
2. Slide the module toward the
until the plug is pushed dl the
way h.
3. To unplug, hold the modtie by the front and back
edges and slide toward the center of the cooktop.
Lift out when unplugged.
4. If you are storing modties, do not stack them or
store other matends on top of them. This could
damage the surface of the moddes.
Not over 1 inch
3. hwer the inside edge of the
module into the cooktop untd
it is flush with the cooking
surface.
Right
Over 1 inch
Wrong
Advertisement
