Glass Cooktop - GE JGP328 Owner's Manual

Built-in gas cooktops
Hide thumbs Also See for JGP328:
Table of Contents

Advertisement

Available languages

Available languages

Cleaning the glass cooktop surface.
Clean your cooktop after
each spill. Use CERAMA
®
BRYTE
Ceramic Cooktop
Cleaner.
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops or a
Scotch-Brite
®
Multi-Purpose No
Scratch blue scrub pad.
The CERAMA BRYTE
®
Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE: Do not use a dull or
nicked blade.
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
Cooktop Cleaner on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Before using the cooktop for
the first time, remove the burner
grates and clean the cooktop
with CERAMA BRYTE
Cooktop Cleaner. This helps
protect the top and makes
cleanup easier.
Daily use of CERAMA BRYTE
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than the
pad included with your cooktop.
Allow the cooktop to cool.
Remove the burner grates and
spread a few drops of CERAMA
BRYTE
®
Ceramic Cooktop Cleaner
on the entire burned residue area.
Using the included CERAMA
BRYTE
®
Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Remove the burner grates. Use a
single-edge razor blade scraper at
approximately a 45° angle against
the glass surface and scrape the
soil. It will be necessary to apply
pressure to the razor scraper in
order to remove the residue.
After scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE
®
Ceramic
Cooktop Cleaner on the entire
burned residue area. Use the
CERAMA BRYTE
®
Cleaning Pad to
remove any remaining residue.
(on some models)
®
Ceramic
Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE
directly to the cooktop.
Use a paper towel or CERAMA
BRYTE
Cooktops to clean the entire
cooktop surface.
®
Ceramic
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
®
thoroughly.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
and a paper towel.
For additional protection,
after all residue has been
removed, polish the entire
surface with CERAMA BRYTE
Ceramic Cooktop Cleaner
and a paper towel.
www.GEAppliances.com
®
Ceramic Cooktop Cleaner
®
Cleaning Pad for Ceramic
®
Ceramic Cooktop Cleaner
®
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jgp628Jgp932Jgp933Jgp962Jgp963

Table of Contents