Special Considerations For Cisco Ucs Fusion Iodrive2 Storage Accelerator Cards; Raid Controller Card Cable Routing - Cisco UCS C24 Installation And Service Manual

Installing or Replacing Server Components

Special Considerations for Cisco UCS Fusion ioDrive2 Storage Accelerator Cards

Table 3-9
Table 3-9 Cisco UCS C240 Requirements for Fusion ioDrive2 Cards
Card
Cisco UCS 3.0 TB MLC Fusion ioDrive2
UCSC-F-FIO-3000M
Cisco UCS 1205 GB MLC Fusion ioDrive2
UCSC-F-FIO-1205M
Cisco UCS 785 GB MLC Fusion ioDrive2
UCSC-F-FIO-785M
Cisco UCS 365 GB MLC Fusion ioDrive2
UCSC-F-FIO-365M
1. See PCIe Slots, page 3-40.
2. Slots 4 and 5 are not available in single-CPU configurations.
3. A rear-panel tab adapter is required to fit the half-height cards in full-height slots 1, 2, 3, and 5.

RAID Controller Card Cable Routing

If the PCIe card that you are installing or replacing is a RAID controller card, see
Considerations, page C-1
Cisco UCS C240 Server Installation and Service Guide
3-44
describes the requirements for the supported Cisco UCS Fusion ioDrive2 cards.
Max. Number of
Cards Supported
4
5
5
5
for cable routing and other guidelines.
Slots That Minimum CIMC
1
Support Cards Firmware
PCIE 1 1.5(2)
PCIE 2
PCIE 3
2
PCIE 5
All 1.5(2)
All 1.5(2)
All 1.5(2)
Chapter 3 Maintaining the Server
Card Height 
(rear-panel tab)
Full height
3
Half height
Half height
Half height
RAID Controller
OL-25761-01