Cisco UCS C24 Installation And Service Manual page 79

Chapter 3 Maintaining the Server
Install a new PCIe riser:
Step 2
If you removed a card from the old PCIe riser, install the card to the new riser (see
a.
Card, page
Position the PCIe riser over its socket on the motherboard and over its alignment slots in the chassis
b.
(see
c. Carefully push down on both ends of the PCIe riser to fully engage its circuit board connector with
the socket on the motherboard.
d. Connect external cables to any PCIe cards installed in the riser.
e. Replace the top cover.
f. Replace the server in the rack, replace cables, and then power on the server by pressing the Power
button.
Figure 3-22
1
PCIe riser 1 alignment slot location
OL-25761-01z
3-40).
Figure 3-22).
Replacing the PCIe Riser
FAN1
FAN2
SAS2
SAS1
FAN3
FAN4
FAN5
FAN6
SAS1 Riser 1
SAS2
CPU1
Riser 2
CPU2
2
PCIe riser 2 alignment slot locations (three)
Cisco UCS C240 Server Installation and Service Guide
Installing or Replacing Server Components
Replacing a PCIe
1
2
3
3-39