Securicode™ Keyless Entry Keypad; Resetting The Power Liftgate - Ford 2013 Flex Owner's Manual

80

Resetting the Power Liftgate

The liftgate may not operate properly and may need to be reset if any of
these conditions occur:
• a low voltage or dead battery
• disconnected battery
• the liftgate is manually closed and left ajar (unlatched)
To reset the power liftgate:
1. Disconnect the battery for 20 seconds then, reconnect the battery.
2. Manually close and fully latch the liftgate.
3. Power open the liftgate by using the transmitter, or the instrument
panel control button.
SECURICODE™ KEYLESS ENTRY KEYPAD (IF EQUIPPED)
The keypad, located near the driver window, is invisible until touched
and then it lights up so you can see and touch the appropriate buttons.
Note: If you enter your entry code too fast on the keypad, the unlock
function may not work. Enter your entry code again more slowly.
You can use the keypad to:
You can operate the keypad with the factory-set 5-digit entry code.
This code is located on the owner's wallet card in the glove box and is
available from an authorized dealer. You can also create up to three of
your own 5-digit personal entry codes.
2013 Flex (471)
Owners Guide gf, 4th Printing, December 2012
USA (fus)
Locks
• lock or unlock the doors
• recall memory features
• enable or disable the autolock
and autounlock
• arm and disarm the anti-theft
alarm