Securicode™ Keyless Entry Keypad - Ford 2013 EXPEDITION Owner's Manual

74
Liftgate Ajar Signal
If the liftgate or liftgate glass are not fully latched, you will receive a
message on the instrument panel. If you see this message, check both
the liftgate glass and liftgate door to ensure they are fully latched.
Liftgate Window
SECURICODE™ KEYLESS ENTRY KEYPAD
The keypad can be operated with the factory-set 5-digit entry code; this
code is located on the owner's wallet card in the glove box and is
available from your authorized dealer. You can also create up to five of
your own 5-digit personal entry codes.
Programming a Personal Entry Code
You can store up to three personal entry codes.
To create your own personal entry code:
1. Enter the factory-set code.
2. Press the 1•2 on the keypad within five seconds. The doors will lock
and then unlock to confirm that the system is in programming mode.
3. Enter your personal 5-digit code. You must enter each number within
five seconds of each other.
4. Press 1•2 on the keypad to save personal entry code 1.
The doors will lock and then unlock to confirm that programming is
complete.
2013 Expedition (exd)
Owners Guide gf, 3rd Printing, April 2013
USA (fus)
I n f o r ma t i o n P r o v i d e d b y :
Locks
To open the liftgate window, press
the button in the center of the
liftgate above the license plate.
You can use the keyless entry
keypad to lock or unlock the doors
or release the liftgate glass without
using a key.