Ford 2013 Flex Owner's Manual page 65

64 Keys and Remote Control
Integrated Keyhead Transmitter
4. Insert the new battery. Refer to the instructions inside the integrated
keyhead transmitter for the correct orientation of the battery. Press the
battery down to ensure that the battery is fully seated in the battery
housing cavity.
5. Reinstall the rubber gasket.
6. Snap the battery cover back onto the key.
Intelligent Access Transmitter
1. Remove the backup key from the transmitter.
4. Insert a new battery with the + facing downward. Press the battery
down to make sure it is fully in the housing.
2013 Flex (471)
Owners Guide gf, 4th Printing, December 2012
USA (fus)
1. Twist a thin coin in the slot near the key
1
ring to remove the battery cover (1).
2. Carefully peel up the rubber gasket (2)
from the transmitter if it does not come off
2
with the battery cover.
3. Remove the old battery (3).
3
2. Twist a thin coin under the tab
hidden behind the backup key head
to remove the battery cover. Do not
use the backup key to remove the
cover or you could damage the
intelligent access key.
3. Remove the old battery.