Advertisement
14
/ QUICK REFERENCE GUIDE
Convenience
INTELLIGENT ACCESS*
SECURICODE™
KEYLESS ENTRY KEYPAD*
Note:
Your intelligent
access transmitter must
be within 3 feet (1 meter)
of your vehicle.
To unlock and open a
front door, pull a front
exterior door handle. Once
you unlock your vehicle, you
can press the exterior trunk
release button
1
near the
license plate. To lock the doors, press
and hold the door handle lock sensor.
1
To lock all of the doors, press and hold
7•8 and 9•0 at the same time. You do
not need to use the five-digit code first.
To unlock all doors, enter the five-digit
The intelligent access transmitter also
code, and then press and hold 3•4
contains a mechanical key blade. You
within five seconds.
can use it to unlock the driver door or
For complete information, refer to
lock the glove box, if necessary (if your
the SecuriCode Keyless Entry Keypad
vehicle has a locking glove box).
section in the Doors and Locks chapter
See the Doors and Locks chapter in your
of your Owner's Manual.
Owner's Manual for more details.
REMOTE START*
Remote start allows you to start the
The keypad
engine from outside. To start, press
is near the
and then press
twice within three
2
driver's window,
seconds. The exterior lamps flash twice.
It illuminates
Your vehicle runs for 5, 10, or 15
2
when touched.
minutes, depending on the setting.
To get started,
See the Information Displays chapter
you need your
to select the duration of the remote
5-digit factory
start system.
code found on
Once inside your vehicle, apply the
your owner's
brake while pressing the START STOP
wallet card (in
button, if you have keyless starting.
the glove box).
Entering this
If you have an integrated keyhead
code unlocks the
transmitter, insert the key into the
driver's door.
ignition and switch on the ignition as
you normally would before driving.
AUTOWIPERS*
If switched on, your wipers
automatically turn on when moisture
is present on the windshield. The
wiper speed varies based on the
amount of moisture detected
and on the sensitivity setting.
You can change sensitivity
of this feature through the
Information Display. See the
Information Displays chapter in
your Owner's Manual for details.
Note:
Make sure you switch this feature off
before entering a car wash.
GLOBAL OPENING*
Use the remote control to operate the
windows with the ignition off. After you
unlock your vehicle, press and hold the
remote control unlock button to open
the windows and vent the moonroof.
Release the button once movement
starts. Press the lock or unlock button
to stop movement.
Note:
Only the front windows operate
during global opening.
*if equipped
*if equipped
AUTOLAMPS
POWER ADJUSTABLE FOOT PEDALS*
When the lighting control is in the
autolamp position
, the headlamps
You can find the
automatically turn on in low light
the left side of the steering column.
situations or during inclement weather.
Press and hold the appropriate side of
the control to move the pedals farther
Other features may also turn on when
or closer to you.
you switch them on in the information
display and the lighting control is in
Press
the autolamp position
:
to you.
• Configurable daytime
Press
running lamps*.
from you.
• Automatic high beam control*.
Adjust the pedals only when your
• Adaptive headlamp control*.
vehicle is in park (P).
Note:
The headlamps remain on for a
Note:
Never use the controls while your feet
selectable period of time after you switch
are on the accelerator and brake pedals and
off the ignition.
the vehicle is moving.
See the Lighting and Information
Displays chapters in your Owner's
Manual for details.
15
2017 TAURUS /
control on
to move the pedals closer
to move the pedals away
Advertisement
