Speed Control - Ford Expedition Owner's Manual

Driver Controls

SPEED CONTROL

With speed control set, you can maintain a set speed without keeping
your foot on the accelerator pedal.
WARNING: Do not use the speed control in heavy traffic or on
roads that are winding, slippery or unpaved.
Using speed control
The speed controls are located on the steering wheel. The following
buttons work with speed control:
OFF: Press to turn speed control
off.
ON: Press to turn speed control on.
SET +/–: Press to set a speed or
increase/decrease the set speed.
RES (Resume): Press to resume a
set speed.
Setting speed control
1. Press and release ON.
2. Accelerate to the desired speed.
3. Press and release SET +.
4. Take your foot off the accelerator pedal.
5. The indicator light
Note:
• Vehicle speed may vary momentarily when driving up and down a
steep hill.
• If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
• If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.
94
2012 Expedition (exd)
Owners Guide, 1st Printing
USA (fus)
on the instrument cluster will turn on.