Ford Expedition Owner's Manual page 116

Locks and Security
Note: For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys , in which case, you will
need to use your remote start system to reset all MyKeys as admin keys
by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Clear MyKey section.
Troubleshooting
Condition
Can't create a MyKey
Cannot program the MyKey
optional settings
116
2012 Expedition (exd)
Owners Guide, 1st Printing
USA (fus)
Potential Causes
• Key in the ignition is already a
MyKey
• Key in the ignition is the last
remaining admin key (there always
has to be at least one admin key)
• SecuriLock passive anti-theft
system is disabled or in unlimited
mode
• Vehicle has been started using a
remote start system that is
programmed as MyKey . Refer to
Using MyKey with remote start
systems section.
• Key in the ignition is a MyKey
• No MyKeys are programmed to the
vehicle. Refer to Create a MyKey
section
• Vehicle has been started using a
remote start system that is
programmed as MyKey . Refer to
Using MyKey with remote start
systems section.