EnGenius ENS202EXT User Manual page 21

I
NSTALLATION
2. Insert an Ethernet cable into the RJ-45 port labeled LAN
(PoE) on the ENS202EXT.
3. Plug the other end of the Ethernet cable into the PoE port
of the PoE injector.
4. Remove the power cord and PoE injector from the box
and plug the power cord into the DC port of the PoE injec-
tor.
CAUTION!
!
ONLY USE THE POWER ADAPTER SUPPLIED WITH THE
ENS202EXT.
USING A DIFFERENT POWER ADAPTER MIGHT
ENS202EXT.
DAMAGE THE
5. Plug another Ethernet cable into the LAN port of the PoE
injector and connect the other end of Ethernet cable to
the LAN port of the PC.
Figure 2-2: Installing the ENS202EXT
6. Attach and secure the two antennas to the top of the
ENS202EXT.
2-3
I
NSTALLING THE
PoE
LAN
D
EVICE