Dynamic Ip - EnGenius ENS202EXT User Manual

B N S
ASIC ETWORK ETTINGS
Secondary DNS Enter the secondary DNS server address.
Discard Ping on WAN Check to Enable to recognize pings on the ENS202EXT WAN interface or Disable to block pings on the
ENS202EXT WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is
valid. Blocking pings provides some extra security from hackers.
Click Accept to save the settings or Cancel to discard changes.

Dynamic IP

Dynamic IP addressing assigns a different IP
address each time a device connects to an ISP
service provider. The service is most commonly
used by ISP cable providers.
Account Name Enter the account name provided
by your ISP.
Domain Name Enter the domain name provided
by your ISP.
MTU The maximum transmission unit (MTU)
specifies the largest packet size permitted for an
internet transmission. The factory default MTU size
for static IP is 1500. The MTU size can be set
between 512 and 1500.
Get Automatically From ISP
Use These DNS Servers Click the radio button to set up the Primary DNS and Secondary DNS servers manually.
Discard Ping on WAN Check to Enable to recognize pings on the ENS202EXT WAN interface or Disable to block pings on the
ENS202EXT WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is
valid. Blocking pings provides some extra security from hackers.
Click Accept to save the settings or Cancel to discard changes.
Click the radio button to obtain the DNS automatically from the DHCP server.
4-13
D IP
YNAMIC