Pre-Defined Modes - Bosch DINION 5000 IP Installation Manual

34 en | Configuration
4.2.1

Pre-Defined Modes

There are six operating modes settings to make configuration
easier. Normal and FullSun modes are pre-programmed to work
with Automatic Mode Switching. Any one of the six modes can
be selected as the "switch-to" mode in Automatic Mode
Switching, refer to Section 8.7.1 Alarm input. The modes are
defined as follows:
1.
2.
3.
4.
5.
6.
| 1.0 | 2012.01
Normal (Mode 1)
Default installation mode to provide stable pictures over a
24-hour period. These settings are optimized for out-of-
the-box installation.
FullSun (Mode 2)
Reduced gain to provide properly exposed image during
bright conditions.
Mode 3
Default settings.
Mode 4
Default settings.
Mode 5
Default settings.
Mode 6
Default settings.
Installation Manual
DINION capture 5000 IP
Bosch Security Systems, Inc.