Glass Break Sensor - AVS S5 Owner's Manual

CENTRAL LOCkINg FROM THE REMOTE
The alarm will lock/unlock the doors when the alarm is armed/
disarmed.
BOOT RELEASE FROM THE REMOTE
1. Make sure the vehicle ignition is turned off.
2. Press the button on the remote for 3-seconds.
3. The boot will unlock (and if the system is armed it will disarm).
AuTO RE-ARM AND RE-LOCk
This feature prevents the accidental disarming of the system. It will
re-arm and (if central locking is connected) re-lock the doors if the
system is disarmed and a door not opened within 60 seconds.
DOOR LOCk ON IgNITION
The system will lock the doors when the ignition is turned on,
and unlock them when the ignition is turned off (if central locking is
connected).
TIMED HEADLIgHT DELAy
The headlights will come on for 15-seconds to light your path when
the alarm is armed by remote. The headlights can be turned off before
the 15-seconds by pushing the
PERIMETER NIgHT LIgHT
The indicators will stay on constantly for 20-seconds when the alarm
is disarmed, or, until the ignition is switched on.
CONTROL TwO vEHICLES wITH ONE REMOTE
This feature allows you to control two vehicles (such as both family
cars) from one remote. The button controls one vehicle and the
button the other.
button on the remote.
CONTROL THE ALARM wITH yOuR vEHICLE'S FACTORy kEy
If your vehicle has a factory key that locks/unlocks the doors your
AVS alarm may be able to interface with it so that the alarm arms/
disarms at the same time. Boot release will also work from the
factory key (and if the alarm is armed it will disarm). This feature
will work with most factory keys. For more information talk with
your AVS installer.

Glass Break Sensor

CONTROL OTHER DEvICES wITH yOuR AvS REMOTE
With the addition of the AVS RXPRO receiver your AVS alarm may
be able to open/close your garage door or arm/disarm your house
alarm. The module can control many other common remote control
devices. For more information talk with your AVS installer.
COuRIER FuNCTION
Courier function allows the engine to continue running indefinitely
while the system is armed. For more information talk with your AVS
installer.
1. Leave the car running and exit the vehicle. Make sure the doors,
bonnet and boot are shut.
2. Push the button on the remote to arm the alarm as normal.
The engine will continue to run.
3. If the alarm detects an intrusion the alarm will immobilise the
engine and the siren will sound (AVS S5/S4).
4. Upon returning to the vehicle push the
remote to disarm the alarm as normal.
button on the