Siren Keys; Glass Break Sensor - AVS S5 Owner's Manual

SIREN kEyS

The siren is supplied with two keys that fit the switch on the top of
the siren
NOTE: The siren key is unique to your alarm. Make sure the
number is recorded on the card supplied with this manual.
TURNINg THE SIREN OFF / ON
You may need to turn the siren off:
1.
To disconnect the car battery (the siren will
On
sound if it loses power from the battery).
Off
Remember to turn the siren back on after the
battery is reconnected.
2. If the alarm is armed (AVS S5/S4) and you need
to use emergency disarm.
NOTE: If you turn the siren off remember to turn it back on!
SIREN BATTERy
The siren battery charges off your car's battery automatically. If the
car battery goes flat the siren will begin to sound. In this instance turn
off the siren with your key and recharge the car's battery. Once this is
done remember to turn the siren back on.
If the siren battery is flat it will re-charge itself automatically from the
vehicle's power source after approximately one hour.
Intelligent shock sensor
• Included with the AVS S5/S4 and can be fitted to the AVS S3 for an
additional charge (AVS S3 will also require a data battery back-up
siren).
• Dual stage – if the vehicle is lightly impacted it will chirp four
times. Heavy impacts will trigger full alarm.
• Intelligent - the sensor can tell the difference between environ-
mental shocks (aircraft, trucks, extreme weather) and other heavy
impacts such as a thief attempting to break in.
• Auto adjusting – the sensor will sample the background noise
when the alarm is armed and adjust itself accordingly to reduce
false triggers.

Glass break sensor

• Included with the AVS S5 and can be fitted to the AVS S4/S3 for an
additional charge (AVS S3 will also require a data battery back-up
siren).
• Detects the sound frequency of breaking glass.
• The shock sensor also needs to pick up a vibration to the vehicle
for the alarm to trigger from the glass break sensor. This helps to
prevent false triggers.
Turbo timer functions
ON-BOARd TURBO TIMER
For maximum security the system has an on-board turbo timer for
turbo vehicles that can be enabled by your AVS installer.
1. Turn the ignition off and exit the car as normal.
2. Push button 1 (the large bottom button) on the remote to arm the
alarm as normal.
3. The engine will continue to run for a preset run time of 1, 2.5 or 5
minutes.
4. If the system detects an intrusion during the preset run time the
system will immobilise the engine and the siren will sound (AVS
S5/S4).
5. The engine can be stopped before the set time by pushing button 2
(the left button) on the remote for 3-seconds.