Appendix A - Specifications - Navman Fish 4430 Installation And Operation Manual

Appendix A - Specifications

Depth range
· 2 ft (0.6 m) to 600 ft (180 m).
Display type
· FSTN greyscale.
· Screen resolution 160 high x 120 wide
(pixels).
· White multi-level back lighting.
Supply voltage
· 10 to 16.5 V DC.
Supply current
· 280 mA min - no backlighting.
· 400 mA max - full backlighting.
Operating temperature
· 32 to 122°F (0 to 50°C).
Transom transducer cable length
· 26 ft (8 m) - FISH 4431
· 33 ft (10 m) - FISH 4430
Typical depth acquisition time from startup
· 2 seconds at 100 feet (30 m).
Transmit frequency
· 200 kHz.
Transmit power
· 150 Watts RMS @ 13.8 V DC.
Transmit rate
· Max 20 soundings/second
Receiver sensitivity
· Better than 10 micro volts RMS.
28
Standards Compliance
·
·
Temperature measurement range
·
Speed range
·
Speed resolution
·
Communications
·
NMEA output
NMEA (0183 format) is a standard for
interfacing marine electronic devices. The
NAVMAN fishfinder can output the following
data:
·
·
·
·
·
·
·
126.0 mm (5")
EMC: USA FCC Part 15 Class B.
Europe (CE) IEC60945
New Zealand & Australia (C Tick)
CISPR 22
Environment: IPx6 & IPx7
32 to 99.9°F (0 to 37.7°C) Resolution 0.1
units.
1 to 50 kn (57.5 mph, 96.6 kph).
0.0 to 9.9, 10 to 50.
NMEA 0183 (Ver 2.0) 4800 Baud.
DBT (Depth Below Transducer).
DPT (Depth and Keel offset).
TDK (Depth NAVMAN - proprietary).
TKV (Speed NAVMAN - proprietary).
VHW (Speed).
MTW (Water temperature).
XDR (Battery voltage).
27.9 mm 30.5 mm
(1.1")
(1.2")
88.5 mm (3.5")
Fish 4430/4431 Installation and Operation Manual