Introduction; Specifications - Navman FISH 440 Installation And Operation Manual

Thank you for purchasing a NAVMAN 400 series fishfinder. The 400 series is a powerful, yet easy
to use sonar fish and bottom depth detector. Please read this manual carefully before installing and
using your fishfinder. This manual deals with both the FISH400 and FISH440. The more you know
and understand about the capabilities of the unit, the better it will perform for you.
Specifications for 400 Series
• Dimensions
132 mm W(max) x 133 mm H x 46 mm D
• Depth Capability
180 metres, 600 feet
• Transducer Type
Aquatic transom-mount single beam. Thru
hull transducer options are also available.
• Operating Frequency
200 KHz
• Transducer Angle
15 degrees
• Receiver Sensitivity
30 micro volts RMS
• Power Output
400 watts RMS (3200 watts peak-to-peak)
maintained within 10% down to 10.5 volts.
Additional FISH440 Specifications
• Boat Speed
0.0–50.0 kts, mph, kph user selectable
• Water Temperature
0.0–40.0°C (32.0–99.0°F) user selectable
Display is backlit for
Night Operation
Power On/Off
Menu Exit
Backlighting On/Off
Change Value Down
Alarms On/Off
Change Value Up
6
Speci f i c ati o ns
• Display Size
100mm (4¼") Diagonal. 82 mm x 76 mm
(3¼" x 3")
• Display Type
STN temperature compensated
• Display Matrix
100 x 64 pixels
• Input Voltage
10 to 18 volts DC @ 150 mA max. (lights on)
• Backlighting
Even illumination. Seven levels plus off.
• Operation Temperature
0°C to 40°C ambient ( 32°F to 104°F )
• Log
Records up to 9999.9 nm, km, stored in
memory, resetable.
• Power Output
440 watts RMS (3500 watts peak to peak)
maintained within 10% down to 10.5 volts.
FISH400
NAVMAN
Active alarms indication
F=Fish, D=Deep, S=Shallow
Enter Menu Mode
Advance to Next Menu
Move Through Menu Items
NAVMAN Fishfinder User Manual