Log Menu (Fish 4431 Only); Install Menu; Keel Offset - Navman Fish 4430 Installation And Operation Manual

4-6 LOG menu (FISH 4431 ONLY)

Select MAIN MENU - SETUP - LOG to display the
available options.
Press or to
highlight an option:
LOG
Selects which log
is displayed on the
DATA screen, TOTAL
or TRIP.
Press to choose
between TRIP
or TOTAL. Both
logs are retained
in the NAVMAN
fishfinder but only
the selected log is
displayed.

4-7 INSTALL menu

Use this menu at installation time, to select the
language and to enter the keel offset value, the
number of engines and the fuel tank size. The
INSTALL menu can also be used to calibrate the
water temperature and boat speed.
Select MAIN MENU - SETUP - INSTALL to display
the menu.
22
Press or to
highlight an option.
LANGUAGE
The following
languages are
available: English,
French, German,
Spanish, Italian,
Dutch, Swedish,
Portuguese, Finnish
and Greek.
Press or to
highlight the
selected language,
then press to
save and exit.
ZERO TRIP LOG
Resetting the trip log will return the trip log value
to zero. The trip log is retained in the fishfinder
memory so it retains the distance value if the
fishfinder is switched off during a trip. Therefore,
the trip log needs to be reset manually each time
the user wishes to log a trip.
Press or to highlight ZERO TRIP LOG, then
press to select it. The message box "ZERO
TRIP LOG YES" appears.
Press to select YES or NO. Then press
to reset the trip log and exit.
ZERO ALL LOGS
Resetting both logs will return both the trip log
and the total log values to zero.
Press or to highlight ZERO ALL LOGS, then
press to select it. The message box "ZERO
ALL LOGS YES" appears.
Press to select YES or NO. Then press
or to exit.

KEEL OFFSET

Keel offset is the distance between the location
of the depth transducer and the point the
displayed depth is measured from.
Enter a keel offset value when the transducer is
located below the water surface but a display
of total water depth is required, or when
the depth of water below the boat's keel is
required.
Press or to select KEEL OFFSET, then press
to display the keel offset box.
Negative values display the depth as measured
from a point below the transducer (e.g. keel).
Positive values display the depth as measured
from a point above the transducer (e.g. water
surface).
Press or to increase or decrease the value.
Fish 4430/4431 Installation and Operation Manual
or