Table of Contents
Advertisement
Administration settings
To access the Administration Settings page, click on the System menu then the Administration menu on the left and then click on
Administration Settings.
The Administration settings page is used to enable or disable protocols used for remote access and configure the passwords for
the user accounts used to log in to the router.
OPTION
Remote Router Access Control
Enable HTTP
Enable or disable remote HTTP access to the router. You can also set the port you would like remote HTTP access to be available on.
HTTP management
Enter a port number between 1 and 65534 to use when accessing the router remotely.
port
Enable HTTPS
Enable or disable remote HTTPS access to the router using a secure connection.
Remote HTTPS
Enter a port number between 1 and 65534 to use when accessing the router remotely over a secure HTTPS connection.
Access Port
Enable Telnet
Enable or disable remote telnet (command line) access to the router.
Enable SSH
Enable or disable Secure Shell on the router.
Remote SSH Access
Enter the port number for remote SSH access. Must be a port number between 1 and 65534.
Port
Enable Ping
Enable or disable remote ping responses on the WWAN connection.
Web User Interface account
Username
Use the drop down list to select the root or admin account to change its web user interface password.
Password
Enter the desired web user interface password.
Confirm Password
Re-enter the desired web user interface password.
www.netcommwireless.com
Figure 88 - Administration page
DEFINITION
Table 23 - Administration configuration options
NetComm Wireless M2M CDMA Router
91
Advertisement
Table of Contents
